90313 - Aquavalve 3 Way Diverting Valve - Through Bulkhead - White - No tails
The TruDesign Aquavalve (Y valve) is designed and made in New Zealand
Legislation in many countries dictates the use of holding tanks near shore, or in defined areas. By installing a diverting valve (Y Valve), the user has the choice to divert black water to a holding tank or directly overboard when circumstances allow.
The Aquavalve is resistant to most chemicals used in toilets. Recommendations from toilet manufacturers should be followed with regards to chemicals and lubrication.
The Aquavalve is a diverting valve. The rotor seal is designed to operate under low pressure. For Vacuum operated toilets, the valve must be placed in the “no vacuum” side of the installation.
If the direction of the tail offered by the red seal inside the Aquavalve does not suit. A blue seal is supplied with every 120° & 90° hose tail (hose barb) this enables the user to orientate the tail (Barb) in a different direction better suited for the new install.
- WEIGHT:
- 0.00 KGS
- mfg_code
- 90313
