Self-Righting Anchor Swivels - Type 1, 3 & 5
Self-Righting Anchor swivel is made of High Strength Stainless Steel, polished mirror finish.
Product Features:
- Flip swivel - rotates anchor into the correct orientation if it retrieves over the bow upside down
- Covers the size ranges from Rocna and Vulcan anchors 6kg through to 55kg
- Highest work load of any self-righting swivel on the market
- Will fit imperial and metric chain
- unique in the market, meets the same load specs even in sideload
- Stainless Steel Grade: 17 -4PH which is stronger than 316 while still offering excellent corrosion resistance
- Polished mirror finish
- Hardware included: loctite hexagon socket set screws, allen key, installation instructions
Product Sizing Guide:
*Minimum size 5/16" is not recommended for Type 5 use, as it is too small a chain for that size anchor, yet will filt chains down to 5/16"
Disclaimer:
Swivels are a popular accessory helpful in reducing rode twists and allowing the anchor to be rotated upon retrieval. A swivel should be rated to the breaking strength of the chain ( not the working load ), and care must be taken to avoid cheap, poorly engineered, and badly built designs.
When installing, be sure the swivel cannot be subjected to a veering load and can rotate properly. We do not recommend attaching the fork of a swivel directly to the anchor shank. It is safer to put a few links of chain between the swivel and the anchor. If this is done, an articulating ball-andjoint-design is pointless, and an in-line rotating design will be of simpler construction and probably a better solution.
- WEIGHT:
- 0.00 KGS
